Products Range
 
Contact Us
Bharti Engineering Corporation
32 & 33, INDUSTRIAL AREA,
P.O. BOX NO. 15
PHAGWARA-144401, PUNJAB, INDIA
Phone: +91-1824-261461, 260763, 266682
FAX: +91-1824-261462, 502666
Email: bharti@jla.vsnl.net.in,
             info@bec.in

Pumps

Pumpsets are suitable for pumping water. They can be operated at various speeds and are suitable for various applications of agriculture/Irrigation, Industrial, and Domestic purpose.The Pumpsets are manufactured with the best workmanship and materials to give the user a long satisfactory service. Each centrifugal pump is hydraulically tested & approved before assembly.

Special Features

1. BEC Pumpsets are most efficient and economical as they require much less Diesel for the same job.
2.They work at 1500/1800 RPM and have a long dependable service.
3. Bearing pedestal provides a sturdy and robust construction to give long continuous service. The bearing bush and ball bearings are o the best quality to withstand all operating conditions.
4. The Stream lined design, Single construction help withstand all operating conditions.
5. Central delivery pumps require no air release cock and the noiseless operation without any vibration ensures a much longer life.
6. They are easily transportable with factory fitted revolving trolly.
7. Impeller has been designed & Balanced to give maximum output of water.
8. Genuine "BEC" Spares readily available, through more than 1500 outlets throughout the country.

Maintenance

1.Do not operate the equipment beyond the capacities for which it is manufactured to avoid excessive stress & strain.
2. Keep the equipment near the liquid source to minimise suction lift & increase the efficiency.
3. A concrete foundation base & The equipment bolted to the base gives the best results & absorbs all vibrations.
4. The alignment of engine & pump should be checked periodically & also at the time of commissioning. Factor such as wear of the bearings, pipe strains, shifting of the machinery & even transportation disturb the alignment.
5. Both suction & delivery pipes should be supported independently & with a minimum of bends as possible to avoid friction Losses. The Suction pipe should be short & free from Air Leaks. A foot valve is installed to facilities priming.
6. The bearing & housing require cleaning & greasing regularly.
7. While ordering for spares always give type, size & S. No. of the pumps or engine.
8. By using "BEC" original Spares, Long Life of equipment is ensured.
           
Pump Model Pump Size
(MM)
Engine Power
H.P.
Engine Speed
(RPM)
Head Range
(m)
Discharge Range
(L/S)
Comet/IS+ 65+50 4.5 2050 13.6/17.0 14.0/8.0
NW 1+ 65x50 8.0 1800 19.0/23.0 13.0/9.0
65KE250 + / NW2+ 80x65
80x65
5.0
7.0
1500
1800
12.7/15.8
14.3/17.0
14.0/9.0
18.0/15.0
65KE250 + /2M + 80x80 5.0 1500 13.3/16.5 16.0/10.0
100KE215 + / NW4+ 100x100
100x100
6.0
7.0
1500
1800
11.0/13.7
11.0/14.0
20.0/12.0
24.0/16.0
DC 125x125 8.0 1500 8.0/12.0 25.0/25.0